Not every plumber is certified for gas work in MI. Our gas plumbers hold active state certifications for natural gas and propane installations, carry CSST-qualified training for flexible corrugated stainless steel tubing systems, and document every job with a written pressure test result before we close out.
๐ Call +1-855-718-1500 โ Certified Gas Plumbers
If a contractor quotes gas line work without mentioning manometer pressure testing or combustible gas detection at completion, that's a gap in their safety protocol that you should ask about before agreeing to any work.
No unlicensed person touches gas line work at Masters Plumbing Service. The stakes are too high for on-the-job learning.
We also detector-test any existing connections near the work area that weren't disturbed, to confirm no pre-existing issues in the adjacent line.
This documentation is required by many local inspections and is the professional standard for confirming gas work is complete. Soapy water bubble testing is not an acceptable substitute for a manometer test on anything more than a simple appliance flex connector.
Gas line work โ new runs, repairs to service lines, appliance connection upgrades โ requires a permit and inspection in most MI jurisdictions. We pull the required permit, schedule the inspection, and provide you with the inspection sign-off as part of the job documentation.
Every job follows the same detection and pressure-testing standard regardless of scope.
Once the utility has confirmed the street supply is shut and the structure has ventilated, we locate the leak, make the repair, detector-test every connection, perform the manometer pressure test, and coordinate with the utility for gas restoration.
Flexible corrugated stainless steel tubing (CSST) connections require proper bonding in most MI jurisdictions to prevent damage from nearby lightning events โ a code requirement many contractors overlook. Our gas techs are CSST-bonding trained.
We calculate BTU load for the intended appliances, size the new line in black iron or CSST per the installation context, install at the required depth for buried runs, and perform pressure testing on the new segment before any appliances are connected.
A standalone gas system pressure test โ without any repair or installation โ is requested for several reasons: before purchasing a home with gas appliances, when an unexplained gas smell has been investigated and not found but a homeowner wants confirmation the system is sound, or at a contractor's request before final inspection.
Corrugated stainless steel tubing (CSST) is the flexible gas piping used in most newer DeWitt homes โ it's faster to install than rigid black iron and routes easily through framing. However, CSST requires specific installation requirements: proper fittings, correct bonding to the electrical grounding system, and protection at penetration points to prevent abrasion damage.
{Propane systems used in areas of DeWitt, MI without natural gas service have specific considerations compared to natural gas: different line pressures at the regulator (propane distribution pressure varies by system design), different BTU content per cubic foot, and propane's behavior of settling low (it's heavier than air, so propane accumulates at floor level rather than rising to ceilings).|We service propane supply lines from the tank to the structure, appliance connections, regulator function checks, and leak detection using detectors calibrated for propane's lower explosive limit.}
Every step exists because gas work without it is unsafe, regardless of how minor the job appears.
Our dispatcher flags gas calls for certified-only technician dispatch. No unapproved personnel work on gas lines.
For new installation work, we assess the existing supply line pressure, measure the BTU demand of the new appliances, and calculate the required pipe diameter for the new run before quoting.
You receive a flat-rate quote covering the repair or installation, permit costs, and inspection coordination before any work begins. We pull the permit, execute the work, and do not restore gas to the affected segment until the manometer test passes.
The permit inspection follows, and we provide you with the signed inspection record. The job is not complete until that documentation is in your hands.

Needed a new gas line run to an outdoor kitchen setup. Masters Plumbing Service sized the line correctly for the combined BTU load of the burners and the side burner, ran 3/4-inch black iron through the crawl space and up through the exterior wall, installed a shutoff at the outlet, pressure tested the new segment, and handled the permit and inspection scheduling. Inspection passed first time.
Had three contractors look at moving a gas range โ two said they couldn't do it because of the CSST in the line. Masters Plumbing Service's tech was CSST-qualified, relocated the range connection with the correct CSST fittings, added the required bonding conductor to the grounding system, and pressure tested the modified segment. Permit closed with no issues. Very professional from start to finish.
Called Masters Plumbing Service for a propane system inspection before buying a rural property. Their tech checked the regulator function, distribution line pressure, tank connection, and all appliance flex connectors. Found one connector that was beyond its rated service life and replaced it. Written pressure test documentation and a clear condition report on the full propane system.

Our gas plumbers hold active MI certifications for natural gas and propane, and we carry combustible gas detectors and digital manometers on every gas-call vehicle.

Gas line work done right means certified technicians, combustible gas detection at every connection, and a manometer pressure test before gas is restored. Masters Plumbing Service delivers all three on every gas call in DeWitt, MI โ emergency or scheduled.
๐ Call +1-855-718-1500 Now